99 00 01 FORD RANGER 2.5L AUTOMATIC TRANSMISSION ASSEMBLY AT 4X2 2WD

PRODUCT INFORMATION AND PAYMENT AGREEMENT:

The buyer hereby acknowledges that due to the nature of used auto parts, the product(s) listed are sold as described to the best of our knowledge, and IWC make no representation, certification nor warranty regarding mileage and its accuracy. You acknowledge that you have done your research about the product(s), and you have received all the information you requested from us prior to placing your order. You acknowledge that you are buying a used product and you have full knowledge of the potential for personal injury and property damage that might result from it. You further acknowledge and agree that IWC shall have no liability whatsoever for any consequences or incidental damages. While the merchandise of IWC is in the possession of the purchaser, under no circumstance may a “STOP PAYMENT” or “CHARGEBACK” be placed on the transaction. Only once the merchandise has been returned to our establishment may a credit be issued to the rightful cardholder.

WARRANTY AND WARRANTY CLAIMS

Buyer acknowledges that due to the nature of used auto parts, liability of IWC from all causes shall be limited to the price paid for the goods sold or provided. If a part IWC sold with a warranty fails to work during the stated warranty period, liability shall be limited to the replacement of the part or a remedy not to exceed the price IWC received for the part. Warranty does NOT cover labor, diagnostic, towing or rental car costs

ALL WARRANTIES SHALL BE NULL AND VOID IF:

The part IS TAMPERED WITH, DISASSEMBLED OR MODIFIED without written authorization

 The recipient vehicle is converted from a private passenger use to commercial or fleet use, or is used for racing or other competition or off-road recreational purposes.

The part’s failure is caused by abuse, misuse, or modifications.

The part’s failure is caused by using the part for any use other than what was intended or recommended by the manufacturer.

The part fails or becomes defective due to the vehicle being involved in a collision.

The part is installed or operated outside the United States.

We do not offer or cover any labor/installation or additional part charges obtained for any reason

The below installation checklist is not followed accordingly.

IWC is not responsible for injury or damage during or as a result of the installation of our parts. TIMING BELTS/CHAINS, THERMOSTATS, SPARK PLUGS, FLUIDS AND SEALS ARE ROUTINE MAINTENANCE ITEMS AND SHOULD BE REPLACED AT THE TIME OF INSTALLATION.

SHIPPING CLAIMS

Purchased item(s) must be inspected immediately they are received, immediately notify us via email or via eBay messaging if the item(s) were damaged at the time you received them. All damage claims must be made within three days of receipt. Retain all packing materials and shipping documents to help us investigate the cause of the damage.

RECOMMENDED INSTALLATION CHECKLIST FROM INDUSTRY LEADER (LKQ):

ENGINE

Determine why the original engine failure occurred and make appropriate repairs BEFORE INSTALLING A NEW ENGINE.

Ensure this engine you are purchasing is the same application as the one being replaced.

Clear all computer diagnostic codes from the vehicle prior to installing.

Exchange the oil pan and pick-up tube.

Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).

All crankshaft bolts that are drilled through sealant must be applied to avoid leaks.

Install new thermostat & gasket (warranty will be void if engine heat tab is melted or removed)

Replace the timing belt and water pump and Install replacement sparkplugs & wires.

Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors).

Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer.

Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.

Drain excess oil and coolant from exhaust system.

If equipped with an engine oil cooler the radiator or external cooler must be replaced.

Ensure the cooling system is flushed and functioning properly.

TRANSMISSION

Determine why the original transmission failure occurred and make appropriate repairs

Ensure the purchased transmission is materially the same as the one to be replaced

Remove oil pan and replace filter, remove torque converter strap and replace front seal.

Properly install and index the torque converter completely into the front pump.

Inspect and replace rear seal as needed, and change over sensors as needed.

Flush the transmission cooler lines and radiator with a power flush machine or with an aerosol 'Cooler Flush Kit'. This will ensure the cooling system is flowing.

Replace the radiator or cooler if recommended by the manufacturer.

Clear all transmission computer codes in the vehicle prior to starting or operating.

Fill the transmission with the OEM recommended fluids.

Verify the differential portion of the transmission is full of fluid.

Most 4WD & some 2WD vehicles must re-learn the shift logic to the transmission after installation. You may verify with your local dealer if a re-learn is required for your vehicle. Service is not reimbursable.

TRANSMISSION

Determine why the original transmission failure occurred and make appropriate repairs

Ensure the purchased transmission is materially the same as the one to be replaced

Remove oil pan and replace filter, remove torque converter strap and replace front seal.

Properly install and index the torque converter completely into the front pump.

Inspect and replace rear seal as needed, and change over sensors as needed.

Flush the transmission cooler lines and radiator with a power flush machine or with an aerosol 'Cooler Flush Kit'. This will ensure the cooling system is flowing.

Replace the radiator or cooler if recommended by the manufacturer.

Clear all transmission computer codes in the vehicle prior to starting or operating.

Fill the transmission with the OEM recommended fluids.

Verify the differential portion of the transmission is full of fluid.

Most 4WD & some 2WD vehicles must re-learn the shift logic to the transmission after installation. You may verify with your local dealer if a re-learn is required for your vehicle. Service is not reimbursable.

FLAT RATE FREIGHT SHIPPING POLICY

Flat rate freights are only to business addresses or closest freight terminal pickup only, EXTRA SHIPPING COST FOR RESIDENTIAL DELIVERY. If you wish to pick up your order from the closest freight terminal, contact us first before making your purchase, so we can provide you the address of the closest freight terminal, because you will need to use the address of the freight terminal as your shipping address during payment, if you wish to pick it up from the terminal. Flat rate freight does not include HI, PR and AK, WA, contact us first for freight quote if you are buying from these locations.

*** By bidding, purchasing or accepting delivery of a used automobile part purchased from IWC, buyer accepts and agrees to all of the terms and conditions included on this listing, as well as eBay’s market place policies ***